cwdaemon (0.5) unstable; urgency=low

  * Patch by Ladislav Vaiz, OK1ZIA <ziav@adela.fel.zcu.cz>:
  * Adds a pin to the lpt port for switching between a soundcard and
    microphone, uses ESCb escape code.
  * Lada has also split the code into separate files for the serial and
    parallel port.
  * Buffer overflows were fixed.
  * New escape codes: ESC8: device type, ESC9: base port number.
  * Work by Rolf, DL2WRJ:
  * ESCa: PTT on/off, ESCc: tuning on/off, ESCd: PTT delay.

 -- Joop Stakenborg <pa3aba@debian.org>  Sun, 11 May 2003 15:48:47 +0200

cwdaemon (0.4) unstable; urgency=low

  * Support for /dev/lp1 parallel port added.
  * Add weighting. This can be set from the command line (-w switch) or
    from an application using ESC7. Values are from -5 to 5. Contributed by
    DL2WRJ.
  * Speed in/decrease is set at 2 wpm intervals.
  * Halfspace delay has been added, which simply adds half of the dash time
    to the delay after each sign send. You have to use the '~' for that.
    See the README. Contributed by DL2WRJ. Thanks Wolf!
  * New serial schematic with port protection and better keying.
  * Also build a debian package on alpha.

 -- Joop Stakenborg <pa3aba@debian.org>  Tue,  8 Apr 2003 20:57:20 +0200

cwdaemon (0.3) unstable; urgency=low

  * Support added for serial ports, contributed by Wolf-Ruediger Juergens,
    DL2WRJ <WJuergens at t-online.de>. This brings a new command line option:
    -d <device>. Device should be one of ttyS0, ttyS1 or lp0.
  * New function: errmsg for writing to the syslog or console when not forked.
  * Getopt is now used for command line parsing. Some checks added for correct
    UDP port values.
  * The dot-dash delay has been adjusted, so it sounds a bit better.

 -- Joop Stakenborg <pa3aba@debian.org>  Sat,  5 Apr 2003 12:41:49 +0200

cwdaemon (0.2.3) unstable; urgency=low

  * Fix a bug reported by Wilbert Knol <zl2bsj at zl2tze.ath.cx>, cwdaemon
    would 'remember' previous lines, if they are longer than the current one.
  * Add some command line arguments (see cwdaemon -h). The default port can 
    now be changed with '-p', '-n' will cause cwdaemon not to fork and print
    debug information to stdout.
  * Many cleanups (up till here 0.2.2 test release).
  * Fixed a divide by zero which would crash cwdaemon.
  * Use nanosleep instead of usleep.

 -- Joop Stakenborg <pa3aba@debian.org>  Sun,  9 Mar 2003 21:26:24 +0100

cwdaemon (0.2.1) unstable; urgency=low

  * Use automake and autoconf.

 -- Joop Stakenborg <pa3aba@debian.org>  Sat, 18 Jan 2003 14:40:15 +0100

cwdaemon (0.2) unstable; urgency=low

  * Initial release for debian.
  * Added support for german umlauts, "ringed a" and "n tilde".
  * Now installs by default in /usr/sbin.
  * Many cosmetic fixes.

 -- Joop Stakenborg <pa3aba@debian.org>  Sat, 11 Jan 2003 11:03:19 +0100

cwdaemon (0.1) unstable; urgency=low

  * First public release by Rein, PA0RCT.

 -- Joop Stakenborg <pa3aba@debian.org>  Sun, 17 Nov 2002 21:15:11 +0100
